What's your project topic?

Items In Project Materials Listing | Final Year Research Project Topics & Materials In PDF & Doc | iproject

• 1. THE REPAIR OF A DAMAGED AIR CONDITIONER

  » ABSTRACT This project is basically on the repair of a damaged air conditioner. It is intended to provide a break through in the restoration of any damaged air conditioner and thereby curtail the huge expenses incurred in the replacement of the entire unit. This report covers an introduction into what an air conditioner is all about, it’s historical background and working principle. A view on...Continue Reading »

  Item Type: Project Material |  31 pages |  7,134 engagements | 

• 2. THE REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER

  » ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the Deep Freezer under review. Quality and effectiveness of machine maintenance were observed. A minimized cost of maintenance and high Technology of repair were also adopted...Continue Reading »

  Item Type: Project Material |  18 pages |  6,388 engagements | 

• 3. THE RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER

  » ABSTRACT In the mechanical Engineering department of institute of management and technology there and many machines but not all in are good shape or form. This may be due to inadequate maintenance, which is evident in the breakdown of air conditioner. In the case of machine maintenance, the quality and effusiveness of material were well noted. Also not left behind was the cost of maintenance which...Continue Reading »

  Item Type: Project Material |  35 pages |  6,831 engagements | 

• 4. THE FABRICATION OF METAL SHELF

  » ABSTRACT   Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood.  But this one is fabricated with metal. The type of metal used in the fabrication is mild steel and square baluters. The undismountable bookshelf which has five partitions and four compartment under went many process namely, the drawing and the dimensioning of the bookshel...Continue Reading »

  Item Type: Project Material |  50 pages |  7,070 engagements | 

• 5. THE FABRICATION OF A POLYTHENE BAG SEALING AND CUTTING MACHINE

  » ABSTRACT   This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism. Electrical section include the transformer, Regu...Continue Reading »

  Item Type: Project Material |  50 pages |  8,545 engagements | 

• 6. THE FABRICATION OF A FOLDABLE CAMP BED

  » ABSTRACT   In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best satisfied the limitations were selected for prod...Continue Reading »

  Item Type: Project Material |  50 pages |  7,115 engagements | 

• 7. THE DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF

  » ABSTRACT   The purpose of this project which is the design and fabrication of lockable metal shelf is to keep the files, text books, documents etc. in a safe place for future we by the institution and also it will render a maximum service to any office where it will be kept. The primary and second any delta used for the construction of this project were given to us by our supervisor. Engr. Mrs. M...Continue Reading »

  Item Type: Project Material |  50 pages |  6,276 engagements | 

• 8. THE DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND ...

  » ABSTRACT             The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.           The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a 3 HP el...Continue Reading »

  Item Type: Project Material |  50 pages |  6,567 engagements | 

• 9. THE DESIGN AND FABRICATION OF A METAL BOOKSHELF

  » ABSTRACT   Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive.  This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation.  There could only be done by stacking books systematically on a book rack where...Continue Reading »

  Item Type: Project Material |  50 pages |  5,988 engagements | 

• 10. THE DESIGN AND CONSTRUCTION OF BAKING OVEN

  » ABSTRACT   This project is aimed at producing an oven a purposeful baking oven with temperature regulator, which is economical and very convenient to use. The equipment was designed taking into consideration the case of its production, maintenance and services. The production design which includes planning drawing and specifications of materials was directly followed by the actual fabrication / m...Continue Reading »

  Item Type: Project Material |  50 pages |  7,624 engagements | 

• 11. THE DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE

  » ABSTRACT             This work is an attempt to evolve a quicker and easier method of achieving cylindrical shape object from a work price. This will no double save considerable human labour and time wastage involved in traditional manual method of carving.           To achieve this preliminary  experiment was carried out to determine the optimum speed of this machine variou...Continue Reading »

  Item Type: Project Material |  50 pages |  6,386 engagements | 

• 12. THE DESIGN AND CONSTRUCTION OF A SPIN DRYER

  » ABSTRACT   This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideratio...Continue Reading »

  Item Type: Project Material |  50 pages |  7,154 engagements | 

• 13. THE DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

  » ABSTRACT   The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle  which  is attached to the shaft. A helical spring that is incorporated to the shaft of the punch, helps the handle return to its initial position, which makes the machines tedious...Continue Reading »

  Item Type: Project Material |  50 pages |  6,265 engagements | 

• 14. THE CONSTRUCTION OF TWO FACE GAS BURNER

  » ABSTRACT This project deals with the construction and fabrication of a two face gas burner. The gas components consists of the following major components; burner, injector opening, mixing tube, burner support, etc. The gas stove was constructed from medium carbon steel material. The choice of the selected material has to do with cost, and local availability. The distance between the cooking pot an...Continue Reading »

  Item Type: Project Material |  50 pages |  9,871 engagements | 

• 15. THE CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

  » ABSTRACT           This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of  kerosine and gas for cooking and drying which are often not available due to scar...Continue Reading »

  Item Type: Project Material |  50 pages |  6,229 engagements | 

• 16. THE CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (...

  » ABSTRACT             This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology.          Students are expected to learn and apply concepts, principles about energy specially the conversions of  electrical energy to thermal energy, conduction and conventional ...Continue Reading »

  Item Type: Project Material |  50 pages |  6,535 engagements | 

• 17. THE CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE

  » ABSTRACT   This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system.  The report is therefore divided into chapters and each chapter discussed extensively such that an illiterate refrigera...Continue Reading »

  Item Type: Project Material |  50 pages |  7,279 engagements | 

• 18. THE IMPACT OF SELECTED FACTORS AFFECTING TELE-DENSITY IN NIGERIA

  » CHAPTER ONE   1.1 Background of the Study Telecommunications facilities in Nigeria which were first established in 1886 by the then colonial administration. These were geared towards discharging administrative functions rather than the provision of socio economic development of the country. Between 1960 and 1985 the telecommunications sector consisted of the Department of Posts and Telecommunic...Continue Reading »

  Item Type: Project Material |  50 pages |  4,523 engagements | 

• 19. THE ROLES BROADCAST MEDIA IN THE RECENT BOKO HARAM CRISES IN NIGERIA

  » CHAPTER ONE 1.1       BACKGROUND TO THE STUDY In today’s world, there is hardly a day you will open any major newspaper or watch television without seeing a report on terrorism; those news is usually back with visual images, depicting the gory pictures of dead persons, maimed victims, collapse buildings as a result of the impact of bombs, and carcasses of vehicles at the scene of the inci...Continue Reading »

  Item Type: Project Material |  50 pages |  5,030 engagements | 

• 20. MASS MEDIA AND GENDER DISCRIMINATION

  » CHAPTER ONE INTRODUCTION   1.1   BACKGROUND OF THE STUDY This research examines mass media and gender discrimination in Nigeria with special focus on female gender discrimination.  Gender issue or what is otherwise called feminism and womanism has been a topical issue in the contemporary period, as series of books and articles have been written on the topic; many conferences have been held ...Continue Reading »

  Item Type: Project Material |  50 pages |  6,294 engagements | 

• 21. NEWSPAPER COVERAGE OF VIOLENCE IN NIGERIA

  » ABSTRACT   The purpose of this study is to examine the influence of newspaper structure and direction on the coverage of the Niger Delta Crises by newspapers in Nigeria.   The study adopted the Agenda Setting Theory and the Gate Keeping Theory for its theoretical framework. Overall, the review of literatures showed that ownership and direction exerts a considerable influence on news coverage.  ...Continue Reading »

  Item Type: Project Material |  50 pages |  4,808 engagements | 

• 22. ROLE OF NIGERIAN MASS MEDIA IN THE PROMOTING FREE AND FAIR ELECTIONS

  » ABSTRACT The aim of this study was to determine The role of Nigerian Mass media in the promoting free and fair elections (A study of heartland FM, IBC and Hot FM). The study adopted the survey design using the questionnaire as the research instrument. The study addressed three research questions. The findings revealed among others that mass mediahas a major role in mobilizing citizens for politica...Continue Reading »

  Item Type: Project Material |  50 pages |  6,110 engagements | 

• 23. THE EFFECT OF DRESS CODE ON EMPLOYEE’S PERFORMANCES IN THE OFFICE

  »       ABSTRACT   This project was designed to highlight the effect of dress code on employee’s performances in the office. The research look into different factors affecting dress code in an organization; the positive and negative effect of dress code on performance in the office. Questionnaires were distributed to 50 (fifty) member of Zenith Bank and 50 (Fifty) member of GP house respective...Continue Reading »

  Item Type: Project Material |  50 pages |  4,971 engagements | 

• 24. THE ROLE OF MASS MEDIA IN PROMOTING GENDER EQUALITY IN NIGERIA

  » ABSTRACT The mass media may have a crucial role in either reinforcing, or challenging such inequalities. Television, radio, newspapers and film have long been recognised as key players in society: helping to define people’s sense of taken for granted normality (see Eldridge et al., 1997). “The role of Mass Media in promoting Gender equality in Nigeria in Nigeria in Nigeria”. This study exami...Continue Reading »

  Item Type: Project Material |  50 pages |  7,916 engagements | 

• 25. INFLUENCE OF SOCIAL MEDIA ON POLITICAL MARKETING IN 2015 GOVERNORSHIP ELECTION

  » ABSTRACT   This study investigated the impact of social media on political marketing during the 2015 governorship election in Delta State. The research objectives include to determine the determine the political message aspirants share on social media, to ascertain the challenges of political marketing on social media. The survey method was employed while the questionnaire was research instrument...Continue Reading »

  Item Type: Project Material |  50 pages |  5,397 engagements |